HOW A PLASMA CUTTER WORKS  Sponsored by Torchmate CNC plasma systems  www.torchmate.com           appliedrobotics@yahoo.com

Our all-new 23 page catalog and price list is now available on-line!! For more information, click here.

Home page	How they work	CNC plasma cutting	Request Catalog
History of plasma cutters	How to select a plasma cutter	Sample cuts	Visit Torchmate CNC plasma site

Plasma cutters work by sending an electric arc through a gas that is passing through a constricted opening.  The gas can be shop air, nitrogen, argon, oxygen. etc.   This elevates the temperature of the gas to the point that it enters a 4th state of matter.  We all are familiar with the first three: i.e., solid, liquid, and gas.   Scientists call this additional state plasma.  As the metal being cut is part of the  circuit, the electrical conductivity of the plasma causes the arc to transfer to the work.    The restricted opening (nozzle) the gas passes through causes it to sqeeze by at a high speed, like air passing through a venturi in a carburetor.  This high speed gas cuts through the molten metal.  The gas is also directed around the perimeter of the cutting area to shield the cut.

	In many of today's better plasma cutters, a pilot arc between the electrode and nozzle is used to ionize the gas and initially generate the plasma prior to the arc transfer.   Other methods that have been used are touching the torch tip to the work to create a spark, and the use of a high-frequency starting circuit (like a spark plug).   Neither of these latter two methods is compatible with CNC (automated) cutting.   The photo at right shows consumables from a Hypertherm Powermax 900 plasma cutter.   The electrode is at the center, and the nozzle just below it.  The orange piece above the electrode is the swirl ring, which causes the plasma to turn rapidly as it passes.   While these parts are all referred to as consumables, it is the electrode and nozzle that wear and require periodic replacement.